Topic Title: Burner
Created on July 14, 2014 at 08:42 PM

Ron schencks

How do I get to the burner to clean it and the best way to do it. I have a tradition LS


Everyone has their own way of doing this. I remove the control panel, valve, screen & shutter & use a shop vac to suck the dirt out. Some use an air compressor to blow the dirt but that only clogs up the burner because there is no where for the dirt to go.
If this does not work you will need to remove the drip pan & the deflector plate over the burner. Then remove the 4 screws holding the top of the burner to remove the debris.