Topic Title: New ignitor
Created on March 29, 2015 at 10:51 AM

Doug Patrick

I have installed a new ignitor and still wont light and no spark. Whats next? Love the grill

Caldwell

Doug, try this trick.... pull the probes from the bottom of the grill and make sure there is at least a 1/4 inch gap between the probe tips. Re-install and strike the ignitor and check to make sure there is a STRONG spark jumping between the probe and the CAST IRON BURNER. If there is no spark, return the kit to your dealer for an exchange. If the spark is weak, adjust the probe tip a little further apart. Make sure you do not damage the ceramic.