Topic Title: Maverick spark igniter
Created on December 8, 2015 at 08:50 PM

Richard Mc P

Hello every one, proud owner of Maverick grill.Bought new in june of 2011. Spark igniter does not work at all. My question is , what's the easiest way to disassemble , to clean or replace. Thank-you for any replies.

Grill Man

It's not hard at all to replace! No need to disassemble your grill. Remove the gas tank, get a long Phillips head screwdriver and look up on the underside of the bottom of the grill, you will see a slotted hole, remove the screw and electrode, then check to see if it sparks using the igniter while it's still connected. if there is no spark you definitely have a problem, most likely with the rotary igniter. to remove the igniter, pull the electrode wire from the back of the igniter and remove the 2 screws holding in the rotary igniter and replace.