Topic Title: iginitor problems
Created on November 14, 2010 at 05:45 PM

mike

Purchased new heritage grill 9/10 iginitor quite working after first use, replaced with one from holland and same happened after first use, no spark from either after first use.Any suggestions on what is going on?

@ Mike

Mike,
You were not specific on whether you changed out both the igniter & the electrode or not.
If you changed both, check your electrode wire to make sure it is not pinched or grounded anywhere on the body of the grill. Also make sure your gap at the tips of the electrode is about 1/4".