AG10-300 Pinnacle Cooking Grid. DIM: (l)22" x (w)16.5"APCGDX

This stainless steel cooking grid will fit the Pinnacle Holland Grill. It takes two (2) of these to make a complete cooking surface but we sell them separately in case you only need to replace half of the cooking grid.

AG10-600 Pinnacle Sizzle Tray NOTE: Does NOT fit regular size grillsAPSTNDNFRSG

This stainless steel sizzle tray fits the old larger-size Pinnacle Grill.

NOTE: this sizzle tray ONLY fits the Pinnacle Grill. It does NOT work with regular size Holland Grills. 

AG2-106 Air BaffleAAB

This stainless steel air baffle fits all full-size Holland gas grills and replaces the old “swiss cheese” style air baffle in older models. It’s installed on the inside front of the bottom of the grill to sit just over the neck of the burner. It’s purpose is to slow the incoming air to allow it to be heated and then circulated.

AG2-107 Flame DeflectorAFD

The latest in design for the current flame deflector features “winged” sides and offset heights to provide more even heat distribution. A peep hole in the front flange allows viewing of the flame and its stainless construction will provide long-lasting performance.

AG2-400 Deluxe WheelADW

Price is for one (1) wheel.  Part shown fits these full size Holland Grills:  Liberty, Freedom, Independence, Tradition, Legacy, Tribute, Patriot, KC Pellet. It also fits models Classic, Heritage, Premier, Smokehouse and The Vintage.

Buy 2 and SAVE!
Just update the quantity in your cart and you will see your savings.

AG3-511 (LS) Locking CasterALC

Locking caster wheel for LS series grills.

NOTE: (you may also need part no. SG4-512 Caster Socket Insert. Sold separately. Click here to see it)

AG4-150 Nickel Plated KnobANPK

On/off gas switch.  Fits all regular, full size Holland gas grills.

AG4-151 Control Knob RingACKR

The part shown is used with the nickel plated-style on/off gas knob as a trim piece. Make sure your grill model requires the use of this piece.

AG4-160C Tank Heat ShieldATHS

As its name implies, this part helps shield your LP tank from radiant heat coming from the bottom of the grill. The oval cutout allows access to the electrode for replacement if needed.

NOTE: This part ONLY fits the Apex/Epic/Freedom/Independence and Liberty models. It does NOT fit any other Holland grill model.

AG4-250K Handle Kit (Fits Current Models)AHKCM

Replacement handle kit for current models.  Fits the Apex, Elite, Epic, Freedom, Independence, Pinnacle, Vintage.

AG4-281 Lid ThermometerALT

Part shown fits all regular, full size Holland gas grills.

Installation Instructions/Template

AG4-307C Cabinet Door MagnetACDM

Door magnet for Holland Grill cabinet models.

AG4-308C Utensil HookAUH

Hook used to hang utensils on. Fits on the inside of the door on Holland Grill cabinet models (Epic, Apex)

AG4-310C Cabinet Door KnobACDK

Replacement door knob for Holland Grill cabinet models (Epic, Apex)

AG4-511A Locking CasterALC

Locking caster wheel fits models Epic, Apex, Maverick and Wrangler.

AG4-512A Non-locking CasterANC

This non-lock caster wheel fits models Epic, Apex, Maverick and Wrangler.

AG4-702 Black Shelf Support (LF/RR)ABSS

This black powder-coated part supports the shelves and fits all full size Holland Grills. As you face the grill, this attaches on the side of the grill in the Left Front and the Right Rear position.

AG4-703 Black Shelf Support (LR/RF)ABSS

This black powder-coated part supports the shelves and fits all full size Holland Grills. As you face the grill, this attaches on the side of the grill in the Left Rear and Right Front position.

BHA3054 - Ignitor KitBIK

Part shown fits all regular, full size Holland gas grills. (NOTE: not applicable to older grill models that do not have an ignitor)

CG1-300 Patriot Cooking Grid (Charcoal Grill)CPCGG

The replacement cooking grid for the Patriot Charcoal grill is constructed of stainless steel and built to last. The heavy-duty hooks allow you to adjust the height of the grid and it’s cool “trap door” allows you to add hot coals while you’re grilling without disturbing the food. NOTE: ONLY used for the Patriot Charcoal Grill.

CG1-301 Patriot Charcoal Pan (Charcoal Grill)CPCPG

The replacement charcoal pan for the Patriot Charcoal grill is constructed of heavy duty stainless steel and built to last. NOTE: This charcoal pan is used ONLY on the Patriot Charcoal Grill. 

EC1-105 Heating ElementEHE

This part fits only the Holland Companion Electric portable grill.

EC1-109 Temperature ControllerETC

This parts works only for the Companion Electric portable grill.

Gas Orifice--Full Size GrillsGOSG

Order the proper orifice size for you Holland Grill to get the correct grilling temperature. Orifices are sold by “size” of the hole depending on the type of grill you have. Liquid Propane (LP) or Natural Gas (NG) require different size orifices. Likewise, black grills require a different orifice than stainless grills. Make sure you have the proper size before you install and use.

All full size Black Steel Holland Grills require a #55 orifice for LP and a #48 for NG.

All full size Stainless Steel Holland Grills require a #57 orifice for LP and a #53 for NG.

EXCEPTION: Pinnacle Grill– LP requires a #53.  NG requires a #45

CAUTION: DO NOT USE THE WRONG SIZE ORIFICE FOR YOUR GRILL.

• Black Grill, LP–order #55
• Black Grill, NG–order #48
• Stainless Grill, LP–order #57
• Stainless Grill, NG–order #53
• Pinnacle Grill, LP–order #53
• Pinnacle Grill, NG–order #45

MG1-1000 Companion Grease PanMCGP

This part fits both the electric and gas Companion models. It slides easily into the guides on the side of the grill to catch the drippings during grilling.

(NOTE: Sorry folks but we do NOT have any of the Grease Pan Liners. But good news is that you can pick some up at your local box store or save yourself some money and just line it with aluminum foil.)

MG1-105 Burner TubeMBT

Replacement burner for all Companion gas grills.

MG1-107 ASSM Companion Flame DeflectorMACFD

This odd-looking thing actually is a very important part for the portable Companion gas grill. When installed properly the stainless steel flame deflector helps spread the heat around to give you even cooking performance.

MG1-300 Companion Cooking Grate (NOT for full-size grills) DIM: (l) 16.75" x (w) 12.5"MCCGFFGDX

This Stainless Steel cooking grate fits both the Gas and Electric portable Companion models.

NOTE: This grid does NOT fit regular, full-size Holland Grills.

PF1-600 Stainless Steel Sizzle Tray (does not fit Pinnacle)PSSSTNFP

Part shown fits all regular, full size Holland gas grills EXCEPT the Pinnacle, Premier, Premier II,  LS series,  and Legacy. (The reason it won’t fit the older models that have a chip drawer is because the drawer is too long on those models. We will work to fix that sometime in the near future).

Instructions PDF link below

PF1-600 INSTALLATION to retro fit new drip pan into older grill models

SG2-100-4 Inside Heat ShieldSIHS

Replacement inside heat shield for older model Holland Grills to help prevent burn-out in the grill’s bottom shell.  This part was typically utilized in non-aluminum bottom models. (Classic, Classic II, etc)

SG2-1000 Drip BucketSDB

Part shown fits all regular, full size Holland gas grills.

SG2-101 Black Lid HingeSBLH

Black powder-coated hinge fits all full size Holland Grills.

SG2-103 Air ShutterSAS

Air shutter is necessary to adjust air/gas mixture on the burner to provide maximum, efficient burn.

SG2-104 Insect ScreenSIS

The insect screen fits inside the air shutter (SG2-103) to help prevent insects from entering the burner causing gas flow obstructions.

SG2-105 Cast Iron BurnerSCIB

Part shown fits all regular, full size Holland gas grills, and includes insect screen, air shutter and mounting bolts.

SG2-108EXT SearMate Gas Hose ExtensionSSGHE

Use this 8-inch extension hose when you need a little extra hose length for the SearMate accessory.

SG2-108SBN SearMate Gas HoseSSGH

Replacement 30-inch gas hose for infrared SearMate accessory.

SG2-109 Hose/RegulatorSH

Hose/Regulator. Low pressure regulator/hose fits all full size Holland Grills and the larger Pinnacle. Does NOT work for the portable Companion.

SG2-202A Spring HandleSSH

The cool-touch spring handle fits any Holland Grill that does NOT require the tube-style handle assembly. It also fits all gas and electric portable Companion models.

SG2-301 Black Smoke StackSBSS

Just in–we now have a supply of the black smoke stacks if you need to replace yours. This part will fit all full size Holland gas grills.

SG2-815 Brass T-fittingSBT

The Brass T-fitting is used to connect an accessory SearMate or Side Burner to your Holland Grill. Using this part may also require the use of the Brass Coupling (SG2-816) to complete the installation.

SG2-816 Brass Swivel CouplingSBSC

The Brass Swivel Coupling is used along with the Brass T-fitting (SG2-815) to attach an accessory such as a SearMate or Side Burner to you Holland Grill.

SG4-102 Angled Gas ValveSAGV

Part shown fits all regular, full size Holland gas grills.

SG4-150 Gas Valve Knob (Red)SGVK

Red on/off gas knob.  Fits all regular, full size Holland grills.

SG4-512 Caster Socket InsertSCSI

Plastic insert to accommodate part no. AG3-511 locking caster for LS models.

(Note: Locking Caster sold separately. Click here to see it.)

SG4-701 NuStone Side Shelf, Dark Gray (Doesn't fit Classic II and Premier II)SNSSDGFCIAPI

Buy 2 and SAVE!
Just update the quantity in your cart and you will see your savings.

This shelf will fit any of the Holland full size grills EXCEPT The Classic II and Premier II. The hole pattern is different than those two grills require. The Black Side Shelves (SS1-701SS) will work on the Classic II and Premier II but the hole pattern on the underside of the shelf needs to be drilled out to fit.

SG4-750 Rotary IgnitorSRI

Part shown fits all regular, full size Holland grills with ignitors.

SG4-751 ElectrodeSE

The electrode is part of the ignitor assembly. It is placed inside the grill next to the burner and carries the spark to ignite the gas coming from the burner. The wire attaches to the ignitor (SG4-750) to create the spark.

SG4-752 Ignitor KnobSIK

Fits all standard, full size Holland gas grills.

SG4-909 3/4" Drain ValveSDV

This ball valve fits on the end of a 3/4″ threaded drain pipe to help drain food drippings out of your Holland. You can also close it off to use the steaming feature of The Holland Grill. It also has a convenient hook to hang your drip bucket on and the Holland Logo stamped on it. (Note: This product does NOT fit the original drain pipe of The Maverick grill or older Hollands that use a 1/2″ drain pipe.)

SG4-910 3/4" Drain PipeSDP

This 3/4″ OD drain pipe fits all current model Holland Grills. Some of the very old original models (Classic II, Premier II, Premier, Classic, etc) May have a 1/2″ pipe thread. Make sure this 3/4 will fit your drip pan. If your pipe has rusted out this one is just what you need.

SG5-202 Spring Handle BracketSSHB

This part fits any full size Holland Grill that requires the use of the SG2-202A Spring Handle.

(NOTE: this part does NOT fit the portable Companion models)

SG5-406 Push Nut, SilverSPNS

The part shown is used to secure the Deluxe Wheel (AG2-400) to the axle for models that use the wheel.

SG5-407 Hub Cap for Deluxe WheelSHCFDW

This part works on the Deluxe Wheel (AG2-400) on models that use the wheel. The hubcap covers the push nut (SG5-406) to give the wheel a finished look.

SS1-101SS Stainless Lid HingeSSLH

Stainless steel hinge fits all full size Holland Grills.

SS1-701SS Black Side Shelf (will fit Classic II and Premiere II with modification)SBSSFCIAPIWM

Part shown will fit all regular full-size Holland Grills EXCEPT the Classic II and Premier II because the hole patterns do not match up. However, you can drill out the hole pattern on the underside of the shelf to make it work for these two grills.

Buy 2 and save! Just update quantity in your cart and you will see your savings.

SS3-250K Handle KitSHK

Replacement Handle Kit fits the Tradition, Tradition LS, Legacy, Legacy LS models.

SS5-702 Stainless Shelf Support (LF/RR)SSSS

This part supports the shelves and fits all full size Holland Grills. As you face the grill, this attaches on the side of the grill in the Left Front and the Right Rear position.

SS5-703 Stainless Shelf Support (LR/RF)SSSS

This part supports the shelves and fits all full size Holland Grills. As you face the grill, this attaches on the side of the grill in the Left Rear and the Right Front position.

SS5-914K Lid Stop KitSLSK

This lid stop kit includes everything you need to replace damaged or worn lid stops on your Holland Grill. Kit will fit Epic, Apex, Liberty, Freedom, Independence, Maverick, Wrangler and Vintage models.

SU1-102 SearMate Gas Valve NOTE: Do NOT Use For GrillsSSGVNDNUFG

Brass replacement gas valve for SearMate. Orifice is included and is set ONLY to be used with Liquid Propane (LP). Gas valve fits both black and stainless models.

NOTE: This valve is designed to work ONLY with the SearMate accessory. It will NOT work for regular Holland Grills.

SU1-300 SearMate GridSSG

Stainless Steel replacement cooking grid for Holland SearMate. Fits both black and stainless models.